Logic Controllers

Logic Controllers

Microprocessor based logic controllers which can remotely-control electrohydraulic components present in agricultural or industrial machines. Their principal characteristics are that they are simple, easy to handle and are flexible.

Logic controller with 4 commands
Logic controller with 6 commands
Logic controller with 10 commands
Autocut system

Mod. COMAND4
Comand 4
KIT TO CONTROL FOUR ELECTROHYDRAULIC COMPONENTS
This logic controller combined with its respective keyboard, allows one to remotely control 4 double function electrohydraulic components or electrical attuators. The commands can be of the fixed or timed type,with permanent or temporary command. Delays for switch-on or switch-off can be inserted. It is possible to establish priorites or exclude simultaneous functions. The keyboard is supplied with an emergency button ( as required by regulations) that interrupts the power supply and all the functions.
The simbols and the language used on the keyboard can be personalised on request. Supplied complete with cabling for connection to the power supply and the electrovalves.

Mod. COMAND6
Comand 6
KIT TO CONTROL SIX ELECTROHYDRAULIC COMPONENTS
This logic controller combined with its respective keyboard, allows one to remotely control 6 double function electrohydraulic components or electrical attuators. The commands can be of the fixed or timed type,with permanent or temporary command. Delays for switch-on or switch-off can be inserted. It is possible to establish priorites or exclude simultaneous functions. The keyboard is supplied with an emergency button ( as required by regulations) that interrupts the power supply and all the functions.
The simbols and the language used on the keyboard can be personalised on request. Supplied complete with cabling for connection to the power supply and the electrovalves.

Mod. COMAND10
Comand 10
KIT TO CONTROL TEN ELECTROHYDRAULIC COMPONENTS
This logic controller combined with its respective keyboard, allows one to remotely control 10 double function electrohydraulic components or electrical attuators. The commands can be of the fixed or timed type,with permanent or temporary command. Delays for switch-on or switch-off can be inserted. It is possible to establish priorites or exclude simultaneous functions. The keyboard is supplied with an emergency button ( as required by regulations) that interrupts the power supply and all the functions.
The simbols and the language used on the keyboard can be personalised on request. Supplied complete with cabling for connection to the power supply and the electrovalves.

Mod. AutoCut Pro
Autocut
Cod. 502.100 KNIVES CONTROL DEVICE
The "electric controls" series by Perin Weighmaster grows rich with another item: Autocut Pro. This device allows the synchronized control of insertion and removal of hydraulic knives in vertical mixing wagons, in order to optimize the times and quality of the mixture distributed to the cattle.
This instrument can be placed in the cabin of the tractor or self-propelled machine thanks to its small dimensions and to its easy installation.
The use is simplified by the fact that the insertion and removal times are directly set by means of knobs with scale, without the necessity of complicated programming procedures by keys. The user is also helped in the comprehension of the working cycle by the warning lights which mark the stages of connection and disconnection of knives.
An important novelty, in comparison with the previous model, is the addition of a new potentiometer which allows to set the working time of the knives insertion/removal cycle (from 1 to 60 minutes).
The kit is supplied with cables and connectors necessary for the connection to the power supply source and to the electrovalves.

Mod. COMAND4	KIT TO CONTROL FOUR ELECTROHYDRAULIC COMPONENTS This logic controller combined with its respective keyboard, allows one to remotely control 4 double function electrohydraulic components or electrical attuators. The commands can be of the fixed or timed type,with permanent or temporary command. Delays for switch-on or switch-off can be inserted. It is possible to establish priorites or exclude simultaneous functions. The keyboard is supplied with an emergency button ( as required by regulations) that interrupts the power supply and all the functions. The simbols and the language used on the keyboard can be personalised on request. Supplied complete with cabling for connection to the power supply and the electrovalves.
Mod. COMAND6	KIT TO CONTROL SIX ELECTROHYDRAULIC COMPONENTS This logic controller combined with its respective keyboard, allows one to remotely control 6 double function electrohydraulic components or electrical attuators. The commands can be of the fixed or timed type,with permanent or temporary command. Delays for switch-on or switch-off can be inserted. It is possible to establish priorites or exclude simultaneous functions. The keyboard is supplied with an emergency button ( as required by regulations) that interrupts the power supply and all the functions. The simbols and the language used on the keyboard can be personalised on request. Supplied complete with cabling for connection to the power supply and the electrovalves.
Mod. COMAND10	KIT TO CONTROL TEN ELECTROHYDRAULIC COMPONENTS This logic controller combined with its respective keyboard, allows one to remotely control 10 double function electrohydraulic components or electrical attuators. The commands can be of the fixed or timed type,with permanent or temporary command. Delays for switch-on or switch-off can be inserted. It is possible to establish priorites or exclude simultaneous functions. The keyboard is supplied with an emergency button ( as required by regulations) that interrupts the power supply and all the functions. The simbols and the language used on the keyboard can be personalised on request. Supplied complete with cabling for connection to the power supply and the electrovalves.
Mod. AutoCut Pro Cod. 502.100	KNIVES CONTROL DEVICE The "electric controls" series by Perin Weighmaster grows rich with another item: Autocut Pro. This device allows the synchronized control of insertion and removal of hydraulic knives in vertical mixing wagons, in order to optimize the times and quality of the mixture distributed to the cattle. This instrument can be placed in the cabin of the tractor or self-propelled machine thanks to its small dimensions and to its easy installation. The use is simplified by the fact that the insertion and removal times are directly set by means of knobs with scale, without the necessity of complicated programming procedures by keys. The user is also helped in the comprehension of the working cycle by the warning lights which mark the stages of connection and disconnection of knives. An important novelty, in comparison with the previous model, is the addition of a new potentiometer which allows to set the working time of the knives insertion/removal cycle (from 1 to 60 minutes). The kit is supplied with cables and connectors necessary for the connection to the power supply source and to the electrovalves.